(click on pic for larger image)
Description: VINTAGE K-Zildjian 16" Crash with four drill holes around perimeter
Specifications:
| MAKE | ZILDJIAN |
| MODEL | K-Istanbul |
| SERIAL No. | none |
DIAMETER(inches) |
16" |
| TYPE | Crash |
| WEIGHT (gms) | 1080.00 [gms] |
| ERA | VINTAGE: |
| STAMPING-Length | 1 3/4" approx |
| OTHER FEATURES | Centre-hole diameter = 10mm: 4 Holes of 5 mm diameter have been drilled equispaced on 7 3/8"[18.75 cm] radius (approx) measured from the centre of the bell downward towards the cymbal edge. Holes are slightly out of round in parts and there is a lighter ring/wear pattern around the perimeter of each of these holes that may indicate that rivets were once used but have been since removed. |
Sound Files:[mp3] |
|
NOTE : The ROLL cymbal file has some weird sounds happening at the end that is not the cymbal.
Condition: No keyholing or cracks. Logo stamping is still
very legible with some wear. Some general dirt build up/marks/scratches on surface.
THE WARTY BITS:
1.There is 20mm long indentation from a downward force/knock and several other nicks along the cymbal edge.
2. There is some very minor buckling at a few positions, but mainly at the 20 mm section where the indentation is and at the maxiumum it is about 1mm measured on a flat surface upwards to the cymbal edge.
ALL OFFERS CONSIDERED
(click on pic for larger image)
Description: VINTAGE K-Zildjian Constantinople 14" Crash?
Specifications:
| MAKE | ZILDJIAN |
| MODEL | K-Constantinople |
| SERIAL No. | none |
| DIAMETER (inches) | 14"" approx -* refer to warty bits |
| TYPE | Hi-Hat?/crash? |
| WEIGHT (gms) | 649 [gms] |
| STAMPING/LOGO | small crescent and moon **The K-zildjian part appears to be double stamped |
| STAMPING-Length | 1.733" approx |
| ERA | VINTAGE: |
| OTHER FEATURES | Centre-hole diameter = 10mm: Bell Dia:9.8 cm [approx] Bell Depth:1.5 cm [approx] Total Depth: 2.8 cm [approx] |
| Sound File:[mp3] Recording Device: Protools Mbox2. Mics: Nady condensor & Sm58 . No efx Sticks: Pro-mark 747 Rock 'The Natural' wood tipped |
Condition: No apparent keyholing. Logo stamping is worn.
There is a considerable amount of dirt build up/scratches more predominant on the top than the underside. Some bukling when placed on a flat surface.
Cymbal is quite light and has a lot of flex in it.
*THE WARTY BITS:
1.There is a nice bite taken out approx 26 mm /1.025 " long out of a section of the cymbal around the perimeter. It would appear that an attempt has been made to repair the cymbal and it has been slightly filed/cut down and so appears slightly non-concentric around the cymbal edge.
ALL OFFERS CONSIDERED